Computer Diary

    "Our greatest fear is not that we are inadequate, but that we are powerful beyond measure."

    Marianne Williamson
    from her book "A Return To Love"

    Here my little rant and praise place, where the daily experiences of my programming work are expressed. I publish them with the idea that others might find it useful and benefit from it.

    Tag <Dell>

    Check also other posts with other tags.

    MacOS-X for a UNIX Man with a PC
    last edited 2009/10/30 11:28 (*)

    Dell Latitude D600
    Well, I've got another occassion laptop, a Dell Latitude D600 (2004):

    • 1.4GHz Pentium M
    • 512MB RAM (2x 256MB, max 2GB)
    • 14.1" 1024x768
    • IDE 20GB local disk

    The 1024x768 are meager, but external LCD supports up to 1600x1200.

    And I remembered that a hacked version of MacOS-X 10.5.x actually installs quite well. So I gave it a try with iDeneb v1.3 (MacOS-X 10.5.5), and

    • booting from DVD
    • clicked through until the installation location was listing no disk at all
    • entered "Utilities" - "Disk Utility" and erased the disk with HFS+ Journaled, as next I created 1 partition, and exited afterwards the "Disk Utility" and went back to the installer
    • the "Installation Volume" appeared (the partition I just made)
    • followed the "Customize" and enabled most patches, in particular the wireless "Broadcom" (which I later saw didn't make a difference, wireless doesn't work)
    • skipping DVD integrity checking
    • installation starts, it took a bit more than 1.5 hours to install the system

    As next it booted, since I have only 1024x768 XGA resolution, I set the fonts down to 10px, and antialiasing, making the amount of information dense enough for the small resolution again.

    iDeneb V1.3 (MacOS-X 10.5.5) on Dell Latitude D600 (1024x768)

    I started to install the usual Open Source pearls:

    • Firefox, Thunderbird
    • GIMP, Inkscape, OpenOffice
    • VirtualBox

    and also Closed Source apps like

    • Skype, Opera

    Serious Problems

    Since my 1TB was NTFS, I thought it would like a charm, the read-only works, but when I enabled the write support via MacFUSE and NTFS for Mac as well, and connected the USB external disk, and began to copy some data the system froze for a moment of 10secs, and tried again to repeat and at first sight it seemed to work, but when I put the USB disk back on the Windows XP or the Kubuntu 9 system, ._ files seem to lay around unable to delete - I tried to fix it with ntfswipe but no available, the program crashed. Reattached on Windows I ran in the shell chkdsk /f g: which corrected the corruption. Very bad, but I didn't lost any data from a 80% filled 1TB disk.

    Anyway, here a list of failed programs under iDeneb 1.3 (MacOS-X 10.5.5) on the Dell Latitude D600:

    • external WD My Book Essential 1TB NTFS disk: data corruption
    • iCal: coredumps

    MacPorts: Regaining Pure UNIX is a great setup, but first I required to install XCode-3.1.3 from so make/gcc is around - torrents also exist, 1GB to download. As next I made sure my MacPorts' Perl is used and all subsequent modules:
    cd /usr/bin; mv perl perl.dist; ln -s /opt/local/bin/perl
    port install perl5

    and make sure /opt/local/bin and /opt/local/sbin are in the path of your shell (.profile or .cshrc).

    Next Steps

    I gonna get iDeneb 1.5.1 (MacOS-X 10.5.7) seems to solve some problems, yet, the unreliable USB/NTFS issue is the biggest problem with this setup, as this machine has USB 2.0 and with my 1TB be sufficiently faster than with USB 1.1 on the older Dell C600. As soon I tried it I will post an update.

    iDeneb 1.5.1 (MacOS-X 10.5.7): can't finish install, stays in a loop for the last "3 minutes" for hours - incomplete bootloader, no network - finally could make it bootable by stripping down drivers and bootloader, but then system was unusable only booting via DVD and F8 defining "rd=disk0s1" I could boot - unuseable.

    It's clear, putting MacOS-X on an ordinary PC is a hassle and probably also good so - as that OS is really meant to run on Apple made hardware, and there it runs like a charm. For myself I keep iDeneb 1.3 (MacOS-X 10.5.5) running for some more time, and then choose an alternative, e.g. either iPC-OSX86 or going for the awaited Kubuntu 9.10 again.

    Windows XP for a UNIX Man
    last edited 2009/10/30 11:34 (*)

    Dell Latitude C600 Laptop
    I got an older Dell Latitude C600 (2003), with 1440x1050 pixels large 14.1" LCD screen, still functional, but 256MB RAM only (upgraded to 384MB). Kubuntu 9.04 didn't work on it, the screen was unreadable, the drivers for the ATI Mobility M3 Video Accelerator seem not working for the rather odd resolution (update: found HOW TO: Fix video problem on the Dell Latitude C600/C500 ). In order to still use the machine, I installed Windows XP SP2 - for me as Open Source evangelist a difficult task compromising my life long attitude to avoid Windows by Microsoft.

    Here are the most useful packages to make Windows XP useable:

    Windows XP on a Dell Latitude C600 (1440x1050)


    Since this laptop has only USB 1.1, the 1TB USB HD My Book Essential (CHF 100, 2009/9) is slow, about 200-500KB/s transfer rate. The USB webcam Genius Eye 312 (CHF 20, 2009/9) works, but the USB wireless adapter Netgear WG111v3 (CHF 30, 2009/9) isn't working properly, every 30Min I'm cut off, even the access point is close by and good signal strength is indicated - the typical low quality of network drivers from all the "cheap" adapters like Netgear.

    Anyway, I try to make the best out of the situation to use Windows XP with this machine:

    • 1GHz Pentium III
    • 384MB RAM (256MB+128MB)
    • IDE 20GB local disk
    • USB 1TB external disk
    • USB 54Mbps wifi adapter
    • USB Webcam 640x480/30fps

    total cost CHF 150 (apprx. Euro 100), plus a laptop bag (CHF 30, 2009/9)

    What I like

    I have to say, there are a few things which please me to use XP:

    • USB devices can be plugged in, and icons show up, and I can explore the content, like for USB sticks and other devices, hassle free.
    • Webcam works right away with Skype
    • GUI is responsive, basic features are intuitive
    • Easy to change fonts to be antialiasing
    • Widerange of apps available, but I'm rather reluctant to download from unknown companies or individuals

    What I don't like

    • Rebooting the machine, and often low resolution of 1024x768 shows up, all desktop icons are rearranged - and have to change resolution again to 1440x1050 and arrange the desktop icons again
    • Annoying "Auto Play" feature for new USB devices, even I turned it off it's ignored
    • Unstable wireless, very annoying
    • I tried to NAT between the wifi and the ethernet LAN, followed the tutorials but still didn't work, little debugging information (no /var/log/*)
    • External USB disk turns off when machine goes into sleep/hibernation (which is good), when it awakes, the USB disk is considered newly plugged in

    Filling 1TB

    Western Digital 1TB My Book Essential
    I use the laptop for an off-grid setting where I will have limited electricity, like from a small solar panel, and therefore an older laptop is just right for this application.

    The 1TB My Book Essential from Western Digital for just roughly CHF 100 / Euro 68 was a good option to carry my data of the past 20 years with me, formated under XP with NTFS (r/w also under Linux and MacOS-X) - but there was no way to copy all my data via USB 1.1 and 200-500KB/s only. So I attached it to a desktop with Kubuntu 9.04 with USB 2.0 ports, and it worked right away (ntfsprogs was already installed), after plugin in the /dev/sdb was listed, and I mounted it via

    mkdir /mnt/mybook1tb/; mount /dev/sdb1/ /mnt/mybook1tb/
    and then I started to copy all my data from the server which exports all data to the desktop via NFS, on the USB disk using piped tar like this
    tar cf - dir1 dir2 ... | (cd /mnt/mybook1tb/; tar xfv -)
    and this copy session I started within a screen session.

    The transfer rate is about 10GB/h or 2.7MB/s, which is about 4-10x faster than with USB 1.1; so the transfer of 900GB takes 90hrs or 3.75 days.

    Advanced Usage

    Since I still do pretty much web development, and switched from Apache to Lighttpd I was pleased to see lighttpd ported to Cygwin as well. Now I needed a small dns server to resolve my local web-sites like http://test.local, and compiled just fine.

    Note: the loopback device isn't up by default, you actually need to install it as a device; e.g. when you are off-line without any network connection this might be needed so your local DNS is considered, as there is no way to define a default DNS lookup at Windows XP like at UNIX with /etc/resolv.conf - when you have a network connection, then the DNS entries of that network is considered.

    I run my own little CMS as a Perl CGI and it required a module Image::Size, which I installed like this

    perl -MCPAN -e 'install Image::Size'

    the first attempt failed, as it was quite memory hungry to fetch and compile it, and the 'child_fork' emulation using longjmp failed; after quitting some other apps it worked, and the module was in. Impressive to see Perl install compiled modules on a Non-UNIX system like Windows XP with Cygwin; needless to say this is also due the GCC which is so widerange supported.


    X11 is also ported, and in order to use X11 apps mixed with native XP apps, start
    X -multiwindow &
    and export DISPLAY=:0.0 so other apps know which display to use.


    • Most UNIX commands using Cygwin incl. xterm
    • Local DNS using , locally compiled
    • Lightweight webserver using , precompiled in Cygwin

    Install the init.d structure from the Cygwin package, and adding in /etc/rc.d/rc.local a few lines to start up DNS, HTTPD and X11.


    Chicken Egg problem caught me, I was using a bare laptop, and tried to get Kubuntu on it, failed at the first attempt; installed XP and installed the stuff I need, and discovered there is a solution for the X11 config. After a few hours I concluded following:

    • X11 with 1400x1050 works, dedicated xorg.conf required (probing doesn't work)
    • Webcam works under Linux with a new driver and dedicated compiling
    • Netgear Wifi works under Linux with a new driver and dedicated compiling (see solution )

    which is the "usual" additional work to get peripherie working, also something I'm not willing to invest anymore.

    I tried Kubuntu 9.04 on various systems, and I'm rather disappointed of the unfinished piece of software, and I'm tired to configure simple networking by editing 2-3 files, instead by a handy one page GUI. So, I wait til Kubuntu 9.x has matured, and give it a try with a Live System, and then if I get full resolution, and decent GUI for network administration incl. WPA Wifi settings, I gonna switch again to Linux.

    Interesting Findings

    While trying to resolve the annoying wifi connectivity loss, I discovered that it did matter a lot of the orientation of the USB wifi adapter: I attached the stick with "klett" on the back of the laptop screen, first vertically, and then turned it horizontally and the signal strength of the access point increased significantly. I also discovered my older Netgear WG602v2 AP was much better than the brand new D-Link DIR-301, very odd - but what remained was occasionally wifi network drops and reconnection, definitely Netgear WG111v3 network driver issue.

    Check also other posts with other tags.

    [ post new entry ] (only for administators)



    Tags: (separated by commas)

    Date (optional):



    Copyright 2007-2016, 2020-2024 © by René K. Müller <>
    Illustrations and graphics made with Inkscape, GIMP and Tgif